Wrinkled, Crumbled, Smashed...Troubleshooting section. It's not ruined yet...

We have transfered to the new server for Full Intensity Grafx. You can now find us using our new address fullintensitygrafx.com If you notice and problems with the site like missing images, or whatever, please let me know. Thanks! -John. ---Dated 1-21-2010

1000 Miles and back...Follow along as we install a decal thats traveled through the postal system and got quite mangled and bent up on it's travels.

1. All Is not lost if your decal gets bent. These decals are very durable.	2. This decal traveled a 1000 miles and back . The postman sometimes ignores the "Do Not Bend" sticker on the package.

3. I'll fold it up a little more and step on it a few times.	4. Pretty wrinkled up. Let's install it now. I'll be using the exact positioning method as described in more detail on the application instructions page.

5. I'll first lay it down and squeegee out some of the wrinkles and bubles in the application tape.	6. I prefer the exact positioning method so I'll tape it on three sides and prepare to apply the first side. ALWAYS CLEAN SURFACE WITH RUBBING ALCOHOL FIRST.

7. Lift up the untaped side and cut off the wax paper below it.	8. With firm pressure apply the first side from the center out with a squeegee.

9. Then, lift up and remove the wax paper from the other side and apply it in the same manner. Use firm pressure and squeegee on.	10 . Then slowly peel off the application tape to reveal the decal. The method used here is described in more detail on the instructions page.
This totally wrinked and crumbled decal installed 100% perfect. Apply removing the application tape I popped any remaining bubbles with a needle and pushed out the air. If you get any small wrinkles then a heat gun would usually be able to remove them.